Chimney Repairs in Standish
Chimney stacks repointed, rebuilt and flashed in, so the damp patches on the chimney breast stop coming back. North of Wigan, a short drive from us.
Chimney Repairs for Homes in Standish
The larger houses in Standish often have big feature chimneys, and some of the detached homes carry more than one stack, so there is a fair bit of chimney work up here. The usual faults are the mortar joints weathering out, the flaunching that beds the pots cracking, and the lead flashing round the base perishing, any of which can put a damp patch on a bedroom wall. We repoint the stack, renew the flaunching and cut in fresh lead so the whole detail sheds water again.
We cover Standish and the surrounding area: Almond Brook, Rectory Lane, Church Street, Market Place, Standish Lower Ground and beyond (WN6).
Get a Free Standish Quote
What’s Included
In the conservation core the stacks tend to be taller stone or brick on steep period roofs, and those need matching material and a careful hand so the repair looks right. Where a chimney is no longer in use, we can take it down neatly below the roofline and tile over, which takes a recurring maintenance job off the roof for good. The brickwork, the lead and the roof around it all stay with us, on one written quote.
- Stacks repointed with the right mortar mix
- Full and partial chimney rebuilds to match the house
- Lead flashing and soakers renewed, dressed into the joints
- Flaunching recast, pots reset, cowls and caps fitted
- Disused chimneys removed and tiled over
- Leaks at the chimney traced and stopped for good
How It Works
Chimney Repairs in Standish, FAQs
Yes, we can do both in one visit while the access is up. The larger houses here often have more than one stack, and it makes sense to repoint, re-flaunch and reflash the lot together rather than come back twice.
Usually it is failed pointing, cracked flaunching or perished lead flashing letting water into the stack, which then tracks down inside. We check all three on the stack and put right whichever has gone, rather than guess at it.
From the ground, look for gaps and shadows in the mortar joints, white staining, or a stack that reads crooked against the sky. Inside, damp patches on the chimney breast are the big tell. Binoculars from the garden will tell you a lot, and we will confirm it up close from a ladder or scaffold.
It can be. Stacks lean when the mortar on the weather side wears faster, and a badly leaning stack in wind is a genuine risk to whatever is below. If yours has a visible lean, get it looked at soon. Making it safe is quick; rebuilding it is planned work, not an emergency, if caught early.
Usually the lead. Flashing that has split, lifted or been bodged with mastic lets water straight in at the joint between stack and roof. Cracked flaunching on top does the same. Both are standard fixes for us, and we check all three, the pointing, the flaunching and the lead, whenever we look at a leaking chimney.