Chimney Repairs in Hindley Green
Chimney stacks repointed, rebuilt and flashed in, so the damp patches on the chimney breast stop coming back. We are based right here in Hindley Green.
Chimney Repairs for Homes in Hindley Green
The terraces in Hindley Green were built with tall shared chimney stacks, and after a century of weather the mortar joints wash out, the flaunching cracks and the lead flashing around the base gives up. That is a common source of a damp patch on a bedroom wall. We repoint the stack, renew the flaunching that beds the pots, and cut in fresh lead flashing so the whole detail sheds water again.
We cover Hindley Green and the surrounding area: Amberswood, Swan Lane, Atherton Road, Leigh Road, Wigan Road and beyond (WN2).
Get a Free Hindley Green Quote
What’s Included
Some of the older stacks around the village have taken on a lean over the years, partly from the mining-era ground the village sits on, and those need rebuilding rather than patching. Where a chimney is no longer used, we can take it down below the roofline and tile over so it stops being a maintenance job forever. Either way you deal with us alone for the brickwork, the lead and the roof around it, with a single written quote.
- Stacks repointed with the right mortar mix
- Full and partial chimney rebuilds to match the house
- Lead flashing and soakers renewed, dressed into the joints
- Flaunching recast, pots reset, cowls and caps fitted
- Disused chimneys removed and tiled over
- Leaks at the chimney traced and stopped for good
How It Works
Chimney Repairs in Hindley Green, FAQs
On the older WN2 terraces it is usually failed pointing, cracked flaunching or perished lead flashing letting water into the stack, which then tracks down inside. We check all three and put right whichever has gone, rather than guessing.
Often it needs rebuilding from a sound course up, which we can do and match to the existing brick. If the stack is disused, taking it down below the roofline and weathering it in is frequently the more sensible spend, and we will give you both options.
From the ground, look for gaps and shadows in the mortar joints, white staining, or a stack that reads crooked against the sky. Inside, damp patches on the chimney breast are the big tell. Binoculars from the garden will tell you a lot, and we will confirm it up close from a ladder or scaffold.
Usually the lead. Flashing that has split, lifted or been bodged with mastic lets water straight in at the joint between stack and roof. Cracked flaunching on top does the same. Both are standard fixes for us, and we check all three, the pointing, the flaunching and the lead, whenever we look at a leaking chimney.
Yes, but with a ventilated cap or cowl rather than sealing it solid. A capped, ventilated flue keeps rain and birds out while letting the stack breathe, which stops damp building up inside the chimney breast. It is a small job that prevents a common problem.