Chimney Repairs in Bolton
Chimney stacks repointed, rebuilt and flashed in, so the damp patches on the chimney breast stop coming back. The near side of Bolton, just north of us.
Chimney Repairs for Homes in Bolton
The terraces on the south and west of Bolton were built with tall chimney stacks, often carrying several pots, and after a hundred years of weather off the open west the mortar joints wash out, the flaunching that beds the pots cracks and the lead flashing round the base perishes. Any one of those lets water into the stack, and it usually shows as a damp patch on a bedroom chimney breast a good way from where it is getting in. We repoint the stack, renew the flaunching and cut in fresh lead so the whole detail throws the water off again.
We cover Bolton and the surrounding area: Deane, Daubhill, Morris Green, Over Hulton, Middle Hulton and beyond (BL3, BL5).
Get a Free Bolton Quote
What’s Included
On the stone-fronted terraces and the older gable stacks the brick can spall and the stonework soften and soot-stain over the years, and where a stack is too far gone we rebuild it from a sound course up and match it back to the terrace. Where a chimney is no longer used, taking it down below the roofline and tiling neatly over the gap is often the sensible spend, so it stops being something you maintain for good. Either way it is us on the brickwork, the lead and the roof around it, all on a single written quote.
- Stacks repointed with the right mortar mix
- Full and partial chimney rebuilds to match the house
- Lead flashing and soakers renewed, dressed into the joints
- Flaunching recast, pots reset, cowls and caps fitted
- Disused chimneys removed and tiled over
- Leaks at the chimney traced and stopped for good
How It Works
Chimney Repairs in Bolton, FAQs
On the older terraces around Deane and Daubhill it is usually washed-out pointing, cracked flaunching or perished lead flashing letting water into the stack, which then tracks down inside. We check all three and put right whichever has gone, rather than guessing.
Yes. If a disused stack on the near side of Bolton is giving trouble, taking it down below the roofline and weathering the roof over is often the sensible answer. If you want to keep it, we repoint or rebuild instead, and we will give you both prices.
From the ground, look for gaps and shadows in the mortar joints, white staining, or a stack that reads crooked against the sky. Inside, damp patches on the chimney breast are the big tell. Binoculars from the garden will tell you a lot, and we will confirm it up close from a ladder or scaffold.
It can be. Stacks lean when the mortar on the weather side wears faster, and a badly leaning stack in wind is a genuine risk to whatever is below. If yours has a visible lean, get it looked at soon. Making it safe is quick; rebuilding it is planned work, not an emergency, if caught early.
Usually the lead. Flashing that has split, lifted or been bodged with mastic lets water straight in at the joint between stack and roof. Cracked flaunching on top does the same. Both are standard fixes for us, and we check all three, the pointing, the flaunching and the lead, whenever we look at a leaking chimney.